High-quality automatic door medical purification hospital steel sliding airtight door

High-quality automatic door medical purification hospital steel sliding airtight door 

1. It adopts small-volume, high-power DC brushless motor, and cooperates with high-speed gearbox system with high transmission power and low noise. Even if it is frequently opened and closed, it can operate for a long time without trouble.

2. V-shaped track and arc groove design, so that the door has a downward-inward movement when it is closed, so that the surrounding rubber is tightly combined with the door frame when the door is closed, and the sealing effect is achieved.

3. It is equipped with a foot control switch and a special handle to facilitate the opening of the door by medical personnel. When the special handle opens the door, the upper part is against the top of the door, and the small push-pull force can open the door. A safety sensor can be selected to effectively prevent the person from being pinched, and can also be set to drive the sensor to automatically open the door from the room.

4. The use of large radius wear-resistant pulleys greatly reduces the running noise and improves the service life.

5. Special rubber seal is installed around the door. When the door is closed, it can be closely attached to the door to ensure the air-tightness of the door. The rubber groove is designed to be removed for easy maintenance.

6. The door body is filled with polyurethane foaming method, and the surface is sprayed with large flat steel plate, which has high flatness and meets the hygiene requirements of the purification workshop and hospital.

Technical parameter

Door load bearing (single) : 1*200kqs

Door load bearing (double) : 2*150kqs

Door width : 700-1600mm

Opening speed : 100-500mm/s (adjustable)

Closing speed : 100-500mm/s (adjustable)

Motor : 24V100W2300rpm

Opening hours : 0~60s (adjustable)

Power input : Ac90v-250V50-60Hz

Adapt to temperature : -20°C~70°C